Fire Prevention Safety Quiz! Trivia Questions Test (2024)

  • 1.

    Asphyxiation robs the body of what?

    • A.

      Blood

    • B.

      Water

    • C.

      Oxygen

    • D.

      Money

    Correct Answer
    C. Oxygen

    Explanation
    Asphyxiation is a condition where the body is deprived of oxygen. Oxygen is essential for the body's cells to function properly and produce energy. Without oxygen, the body's organs, including the brain, cannot perform their normal functions, leading to severe consequences and potentially death. Asphyxiation can occur due to various reasons, such as suffocation, choking, or exposure to toxic gases, all of which prevent the body from receiving an adequate supply of oxygen.

    Rate this question:

  • 2.

    The "P" stand for what in the acronym P.A.S.S

    Correct Answer
    Pull pin

    Explanation
    The "P" in the acronym P.A.S.S stands for "Pull pin." This means that in order to operate a fire extinguisher using the P.A.S.S method, the first step is to pull the pin that is usually located on the top or side of the extinguisher. This action releases a locking mechanism and allows the user to activate the extinguisher by squeezing the handle or lever.

    Rate this question:

  • 3.

    What does the "R" stand for in the acronym R.A.C.E?

    Correct Answer
    Rescue

    Explanation
    The "R" in the acronym R.A.C.E stands for "Rescue." This means that in the context of the acronym, R.A.C.E, the "R" represents the initial step or action of rescuing someone or something in a potentially dangerous or emergency situation.

    Rate this question:

  • 4.

    What class of fire is related to the following symbol?

    • A.

      Class A

    • B.

      Class B

    • C.

      Class C

    • D.

      Class D

    Correct Answer
    B. Class B

    Explanation
    Class B fires involve flammable liquids and gases, such as gasoline, oil, and propane. These fires can be extinguished by using foam, carbon dioxide, or dry chemical extinguishers. The symbol is likely associated with Class B fires to indicate the specific type of fire hazard.

    Rate this question:

  • 5.

    Fire Prevention Safety Quiz! Trivia Questions Test (1)

    The red quadrant on the hazard diamond refers to?

    Correct Answer
    A. Flammability

    Explanation
    The red quadrant on the hazard diamond refers to flammability. This means that the material or substance represented by the diamond has the potential to ignite and burn easily. It indicates that the substance can pose a fire hazard and caution should be taken when handling or storing it.

    Rate this question:

  • 6.

    Class D fires are combustible metals?

    • A.

      True

    • B.

      False

    Correct Answer
    A. True

    Explanation
    Class D fires involve combustible metals such as magnesium, titanium, potassium, and sodium. These metals can ignite and burn at high temperatures, often requiring specialized extinguishing agents such as dry powder or sand to smother the fire and prevent it from spreading. Therefore, the statement "Class D fires are combustible metals" is true.

    Rate this question:

  • 7.

    Name one type of common sprinkler system?

    Correct Answer
    Wet Pipe
    Dry Pipe

    Explanation
    Wet Pipe and Dry Pipe are both types of common sprinkler systems used for fire protection. Wet Pipe sprinkler systems have water constantly present in the pipes, allowing for immediate water discharge when a fire is detected. Dry Pipe sprinkler systems, on the other hand, are filled with pressurized air or nitrogen instead of water. When a fire is detected, the air is released, allowing the water to flow and extinguish the fire. Both systems are widely used in various settings to prevent and control fires.

    Rate this question:

  • 8.

    Avoiding the "electrical octopus" is not a good way of avoiding an electrical fire?

    • A.

      True

    • B.

      False

    Correct Answer
    B. False

    Explanation
    Avoiding the "electrical octopus" is not a good way of avoiding an electrical fire because an "electrical octopus" refers to a situation where multiple electrical devices are plugged into a single power outlet using extension cords or power strips, which can overload the circuit and increase the risk of a fire. Therefore, avoiding the "electrical octopus" by using proper electrical outlets and not overloading circuits is indeed a good way to prevent electrical fires.

    Rate this question:

  • 9.

    Class A fires are what type of combustible materials?

    • A.

      Paper

    • B.

      Wood

    • C.

      Rubber

    • D.

      Cloth

    • E.

      All of the above

    Correct Answer
    E. All of the above

    Explanation
    Class A fires involve ordinary combustible materials such as paper, wood, rubber, and cloth. These materials are commonly found in homes, offices, and other everyday environments. When these materials catch fire, they produce glowing embers and flames. It is important to use the appropriate extinguishing methods, such as water or foam, to suppress and extinguish Class A fires effectively.

    Rate this question:

  • 10.

    Class C fires are flammable liquids?

    • A.

      True

    • B.

      False

    Correct Answer
    B. False

    Explanation
    Class C fires are not flammable liquids. Class C fires involve energized electrical equipment, such as appliances, wiring, circuit breakers, and outlets. These fires are caused by electrical faults or malfunctioning equipment. To extinguish a Class C fire, it is important to turn off the power source before using an appropriate extinguishing agent, such as a dry chemical or carbon dioxide fire extinguisher.

    Rate this question:

  • 11.

    Name the three components needed to cause a fire?

    Correct Answer
    Fuel
    Heat
    Oxygen

    Explanation
    The three components needed to cause a fire are fuel, heat, and oxygen. Fuel refers to any material that can burn, providing the necessary energy for the fire. Heat is required to raise the temperature of the fuel to its ignition point. Oxygen is necessary to support the chemical reaction called combustion, which sustains the fire by providing the necessary oxygen molecules for the reaction to occur. Without any of these three components, a fire cannot start or continue burning.

    Rate this question:

  • 12.

    Mercaptan is manufactured into natural gas to give the gas what type of smell?

    • A.

      Rotten egg smell

    • B.

      Vehicle exhaust smell

    • C.

      Raw sewage smell

    • D.

      Ice Cream smell

    Correct Answer
    A. Rotten egg smell

    Explanation
    Mercaptan is manufactured into natural gas to give it a rotten egg smell. This is done as a safety measure to help detect gas leaks. Mercaptan is a sulfur compound that has a distinctive odor similar to that of rotten eggs. By adding this smell to natural gas, it becomes easier for people to identify if there is a gas leak, as the odor is highly noticeable and unpleasant. This helps to prevent accidents and ensure the safety of individuals using natural gas.

    Rate this question:

  • 13.

    Fire Prevention Safety Quiz! Trivia Questions Test (2)

    What type of special hazards is indicated on the hazard diamond below.

    • A.

      Oxidizing Properties

    • B.

      Flammable Properties

    • C.

      Radioactive Properties

    • D.

      Reactivate Properties

    Correct Answer
    C. Radioactive Properties

    Explanation
    The correct answer is "Radioactive Properties" because the hazard diamond indicates that the substance in question has the potential to emit harmful radiation. This can pose a significant health risk to individuals who come into contact with the substance, as exposure to radiation can cause various adverse effects, including radiation sickness, genetic damage, and an increased risk of developing cancer. It is important to handle and store radioactive materials with great care and follow appropriate safety protocols to minimize the risk of exposure.

    Rate this question:

  • 14.

    The "A" stands for what in the acronym P.A.S.S?

    Correct Answer
    Aim
    Aim at the base of the fire

    Explanation
    The correct answer is "Aim". In the acronym P.A.S.S, "Aim" refers to the first step in using a fire extinguisher. When faced with a fire, it is important to aim the nozzle or hose of the fire extinguisher at the base of the fire. This ensures that the extinguishing agent is directed at the source of the fire, effectively suppressing it. By aiming at the base of the fire, one can cut off the oxygen supply and prevent the fire from spreading further.

    Rate this question:

  • 15.

    What does the first "S" stand for in the acronym P.A.S.S?

    Correct Answer
    Squeeze
    Squeeze handle

    Explanation
    The first "S" in the acronym P.A.S.S stands for "Squeeze". This means that when using a fire extinguisher, the first step is to squeeze the handle or lever to release the extinguishing agent. By squeezing the handle, the extinguisher is activated and the agent is expelled to put out the fire.

    Rate this question:

  • 16.

    What does the second "S" stand for in the acronym P.A.S.S?

    Correct Answer
    Sweep
    Sweep side to side

    Explanation
    The second "S" in the acronym P.A.S.S stands for "Sweep side to side". This means that when using a fire extinguisher, you should sweep the nozzle or hose of the extinguisher from side to side while aiming at the base of the fire. This motion helps to cover a larger area and effectively extinguish the flames.

    Rate this question:

  • 17.

    What does the "A" stand for in the acronym R.A.C.E?

    Correct Answer
    Alarm

    Explanation
    The "A" in the acronym R.A.C.E stands for "Alarm". In the context of emergency response, R.A.C.E stands for Rescue, Alarm, Contain, and Extinguish. The "Alarm" step refers to activating the fire alarm system or notifying the appropriate authorities about the emergency situation. This step is crucial in alerting everyone in the vicinity and initiating the necessary response to the emergency.

    Rate this question:

  • 18.

    What does the "C" stand for in the acronym R.A.C.E?

    Correct Answer
    Contain

    Explanation
    The "C" in the acronym R.A.C.E stands for "Contain". This means that in a crisis or emergency situation, one of the steps in the R.A.C.E protocol is to contain the incident. This involves taking immediate action to prevent the situation from spreading or getting worse. It may include measures such as isolating the area, closing off access points, or implementing safety procedures to limit the impact of the incident.

    Rate this question:

  • 19.

    What does the "E" stand for in the acronym R.A.C.E?

    Correct Answer
    Extinguish

    Explanation
    The "E" in the acronym R.A.C.E stands for "Extinguish." This means that in the context of the acronym, R.A.C.E, the "E" represents the action of extinguishing a fire. The acronym R.A.C.E is often used as a fire safety protocol, with each letter representing a step to take in the event of a fire. The "E" specifically refers to the step of extinguishing the fire, which could involve using a fire extinguisher or any other appropriate method of putting out the flames.

    Rate this question:

Fire Prevention Safety Quiz! Trivia Questions Test (2024)
Top Articles
Latest Posts
Article information

Author: Prof. Nancy Dach

Last Updated:

Views: 6518

Rating: 4.7 / 5 (57 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Prof. Nancy Dach

Birthday: 1993-08-23

Address: 569 Waelchi Ports, South Blainebury, LA 11589

Phone: +9958996486049

Job: Sales Manager

Hobby: Web surfing, Scuba diving, Mountaineering, Writing, Sailing, Dance, Blacksmithing

Introduction: My name is Prof. Nancy Dach, I am a lively, joyous, courageous, lovely, tender, charming, open person who loves writing and wants to share my knowledge and understanding with you.